From Gasglass to Handheld NOVA™ - Over 20 Years of Non-Destructive Gas Measurement Evolution

The Technology Behind Non-Destructive Gas Measurement in Insulating Glass: 25 Years, 1,000+ Customers

Sparklike has been measuring gas concentration in insulating glass units non-destructively since 2000. With more than 1,000 customers worldwide, the technology is now entering a new generation with the launch of Sparklike Handheld NOVA™.

A measurement challenge that has not changed

In insulating glass production, most quality deviations are visible. Scratches can be seen. Excess sealant can be noticed. Spacer alignment can be checked. Gas content is different.

Argon and krypton cannot be detected by sight, and insufficient gas fill does not reveal itself as an obvious defect. Because of this, gas quality has historically been more difficult to verify consistently in daily production.

The Technology Behind Non-Destructive Gas Measurement in Insulating Glass 25 Years, 1,000+ Customers

While gas accounts for a share of total insulating performance, its presence is essential for meeting declared thermal values and industry requirements. For manufacturers, verifying gas content is about ensuring that the unit performs as specified. The challenge has always been how to make the invisible measurable without damaging the product itself.

The technology: spark emission spectroscopy

Spark emission spectroscopy has been at the core of Sparklike technology since the company was founded in 2000. A high-voltage spark is induced into the insulating glass cavity and the resulting light emission is analysed to determine gas concentration — all without breaking the seal. That principle has remained unchanged for more than two decades.

Before the introduction of the handheld design, Sparklike devices were stationary and connected to external power. Measurement was reliable, but portability was limited and integration into daily factory workflows was not straightforward.

2006: the first handheld device

In 2006, Sparklike introduced its first handheld design, marking a decisive shift in how gas measurement could be performed on the production floor. For the first time, fill levels could be verified directly after gas filling using a portable device, while the insulating glass unit remained fully intact and usable.

The device quickly became recognized across the insulating glass industry as a practical and reliable tool for quality assurance. In 2008, Sparklike Handheld 2.0 strengthened its position further, with improved durability and measurement performance validated for demanding factory conditions. The longevity of this generation speaks for itself: devices delivered more than ten years ago continue to be calibrated and serviced at the Sparklike Service Center.

2022: usability refinement

In 2022, Sparklike launched Handheld 3.0 with an updated graphite black finish and an improved user interface, while maintaining the same spark emission spectroscopy technology and 2-second measurement time. The accuracy of Handheld 3.0 was independently verified by ift Rosenheim.

By this stage, Sparklike Handheld was widely regarded as the industry standard for non-destructive gas measurement in insulating glass production. However, as production environments became increasingly data-driven, expectations shifted toward integrated documentation, traceability, and system connectivity. These were the areas where the underlying software architecture of the previous generation had limitations.

2025: Handheld NOVA™ — a new digital foundation

Sparklike Handheld NOVA™ represents the first fully redesigned generation of the device since its original introduction. The spark emission spectroscopy technology remains the same. The proven measurement principle, reliability, and 2-second measurement cycle continue unchanged. What has been completely renewed is everything around the core technology.

The main development focus was modernizing the software and significantly improving data usability. Handheld NOVA™ introduces a redesigned industrial structure, a modernized software environment, wireless data transfer, support for QR-code-based traceability, and enhanced measurement modes. This architecture enables continuous development, allowing new functionalities to be introduced over time.

The result is a device that moves gas measurement from a standalone activity to part of connected quality control, supporting documentation, audit requirements, and transparent quality management without interrupting production workflows.

From Gasglass to Handheld NOVA™ - Over 20 Years of Non-Destructive Gas Measurement Evolution

Evolution without compromising what works

Perhaps the most important aspect of this story is what did not change. The spark technology remains. The non-destructive principle remains. The measurement reliability remains.

With over 2,000 handheld devices delivered and more than 1,000 customers worldwide, this technology has proven its relevance across global insulating glass production environments. Handheld NOVA™ is not a reinvention of that core. It is a structural renewal that ensures the technology continues to serve manufacturers in a modern production environment.

The invisible gas inside insulating glass units still cannot be seen. But today, it can be verified, documented, and integrated into daily quality control more seamlessly than ever before.

Find out more 

For manufacturers looking to explore Sparklike Handheld NOVA™ and its connectivity and traceability features, full product information and contact details are available at www.sparklike.com.

Contact Sparklike to discuss which device best suits your requirements.

About Sparklike

Sparklike is a Finnish technology company specializing in non-destructive gas concentration measurement for the insulating glass industry. Its product range — including the Sparklike Handheld™, Sparklike Laser Portable™, and Sparklike Laser Integrated™ — enables manufacturers to verify argon and other gas fill levels quickly and accurately without opening or damaging the sealed unit. Sparklike devices are used by IGU manufacturers in more than 50 countries worldwide.

Source: www.sparklike.com